Skip links

Added value for your feet

We develop our safety shoes according to the latest technical standards.
Further information on the individual technologies can be found here.

Making sure that your shoe fits you well.
Every foot is very individual. This is true not only for the foot’s length but also for its width. About half of all human beings (50%) have feet of average width, 45% have extra-wide feet and 5% have narrow ones.

Which Baak series for what type of foot?
For normal-width feet: all Baak series
In all series, you will find shoes that are suitable for normal-width feet. Shoes of the widths 11 (N), 11+ and 12 offer an excellent fit for those feet. The individual adjustment is done through the lacing, the quick-release fastener or the hook-and-loop fastener.

For normal-width and extra-wide feet – the Baak Industrial go&relax series

The real BAAK® two-width system –
Two shoes for two widths

The models of this series offer individual fits for normal-width and extra-wide feet. Here, Baak uses the real two-width system: Each width has its own special sole shape, its own last and its own toe protection cap shape. This is the only way to ensure that the foot always rests on the sole optimally. Width N = normal = Width 11 / Width XW = extra-wide = Width 13

As the shape of slimmer and wider feet is not the same, two different lasts ensure the perfect fit for each type of foot. With the 8 mm wider toe protection cap (difference from Width N at Size 42), even relatively wide feet are given enough space for their toes.

For all feet – the Baak Unity series

The unique BAAK® multi-width system –
One shoe for many widths

The unique Baak® multi-width system of the Baak Unity series offers individual width adjustment in the width range from 10 to 14 with only one shoe. How is that possible? It’s quite simple: The Baak Unity models actually consist of two shoes, an inner and an outer one.

The “inner” shoe consists of an extremely elastic Baak flex mesh material, the sock shaft. It adjusts individually to your foot and to its width and shape. The necessary stability is given by the six stabilizing straps of the “outer” shoe. Baak Unity – the genius in fits. The custom shoe that you can buy off the rack.

General fitting info

The fitting of a shoe is determined significantly on its length and width. The shoe length depends on the foot length of course, plus roll-off addition. While rolling the foot, the inner shoe part shortens in relation to the foot, so it is necessary to put some more space to the last. Baak shoes contain a length addition of 12 mm, which avoids bouncing against the toe cap while rolling off.

A – B = absolute board length = foot sole length + addition
A – D = foot length
B – D = roll-off addition

For all feet – the BAAK Unity series

SchuhgrößeLängeWeite 09Weite 10Weite 11Weite 12Weite 13
35236210,5216,5222,5228,5234,5
36242215221227233239
37249219,5225,5231,5237,5243,5
38256224230236242248
39262228,5234,5240,5246,5252,5
40269233239245251257
41276237,5243,5249,5255,5261,5
42282242248254260266
43289246,5252,5258,5264,5270,5
44296251257263269275
45302255,5261,5267,5273,5279,5
46309260266272278284
47315264,5270,5276,5282,5288,5
48322269275281287293
49329273,5279,5285,5291,5297,5
50335278284290296302

All width data in mm.

Sizes differ in 6,6 mm
Widths differ in 6 mm

Four materials – always safe

Toe protection caps for safety shoes have to resist a shock energy of 200 joules according to standard EN 20345:2011. Baak utilizes toe caps made of 4 different materials: steel, aluminium, composite and nano-fiberglass.

Toe protection caps for safety shoes must be able to resist an impact energy of 200 joules, independently of their material (pursuant to EN 20345:2011). 200 joules are achieved when a weight of 20 kg drops from a height of 1 metre. In another test, the toe protection caps must resist a static pressure of 1.5 tons (15 kilo newton). Baak uses toe protection caps made of three different materials: steel, aluminium and composite. The shape and design of the toe protection caps has a decisive effect on the space for the toes and the rolling of the foot.

Cap materials

Steel caps
have always been used for safety shoes. They are stable, and their weight is less than 100 grams for size 42.

Aluminium caps
are 40% lighter than steel caps. Due to the weaker resistance of aluminium, they are a bit thicker than the steel ones in order to comply with the stability requirements of the standards. They are anti-magnetic.

Composite caps
consist of composite materials, which obtain the necessary stability from synthetic resins. They are also 40% lighter than steel caps, and their material thickness is higher than that of steel caps. They enable the production of completely metal-free safety shoes.

Nano-fiberglass caps
are a further development of common composite caps with an improved synthetic resin composition, which enables a higher stability of the caps and/or a lower material thickness and weight. Black is the typical colour of the metal-free caps.

Cap shapes

Symmetrical caps
are used mainly for slim and normal-width feet. The instep of those feet runs relatively close to the centre towards the second toe, which is also the longest toe in most cases. Shoes with symmetrical caps have a sportive look.

Asymmetrical caps
are often used for relatively wide feet. The instep of those feet runs towards the big toe, which is also the longest toe in most cases. Shoes with asymmetrical caps provide more space in the area of the big toe.

In addition, in the Baak two-width system, the asymmetrical cap for the extra-wide shoes is 8 mm wider than the symmetrical cap of the normal-width shoes. The Baak® two-width system is used for the models of the Baak Industrial series with the Baak® go&relax system (see page 25ff/cataloque 2018-19).

Cap design

Baak® flex caps are extended on the outside. Thus, in combination with the Baak® flex zone in the outsole, it is possible for the feet to bend naturally in the area of the basic toe joints.

Test method (toe protection)

A weight (wedge) with a mass of 20kg drops onto a steel cap from one meter height in order to achieve the test energy of 200 J. The height of the plastilin cylinder (see illustration) during the testing process shall not be below the following minimum remaining height..

SchuhgrößeMindestresthöhe (mm)
Bis 3612.5
37 und 3813
39 und 4013.5
41 und 4214
43 und 4414.5
45 und größer15

Different materials for different needs

The soles of our safety shoes consist of two layers that serve different purposes: the midsole and the outsole. The midsole is soft and elastic. It provides good damping and reduces stress on the joints. The outsole is harder and resistant to mechanical and thermal influences. It is also slip-resistant and as abrasion-resistant as possible. The profile layout and the bending behaviour are among the decisive factors that allow the foot to roll over.

Midsole materials

EVA: ethylene vinyl acetate / BSD / LIEVA
EVA is a very lightweight high-quality caoutchouc foam that is also used as midsole material in running shoes. Pressure-moulded EVA is not only very lightweight and elastic but also has excellent damping properties. Another advantage is its great temperature range from –30 °C to +170 °C. Baak was one of the first safety shoe manufacturers to identify those benefits and uses EVA for many of its models. BSD (Baak Special Damping) is a further development of EVA by Baak with an optimized durability, damping and bending behaviour. LIEVA (liquid injected EVA) is a state-of-the-art technology which shows a higher energy absorption with improved durability due to its production process in which liquid EVA is pressed with the help of pressure and temperature.

Polyurethane (PU)
Polyurethane is a foamed plastic that is characterized by high elasticity and a comfortable damping behaviour.

Outsole materials

Nitrile rubber
The outsoles made of nitrile rubber are highly resistant to oils, fuels, many acids and faeces. They are very slip-resistant, robust and durable and have an excellent abrasion behaviour. In addition, they can be heat-resistant up to 300°C. Nitrile rubber outsoles are a little heavier than PU outsoles. Therefore, Baak combines them with particularly lightweight midsole materials in most cases. Nitrile outsoles with a rough lug tread are especially well suited for use in areas with sharp-edged splinters of glass and cuttings on the floor.

PU: polyurethane
Outsoles made of polyurethane, like nitrile rubber outsoles, are resistant to oils, fuels and certain chemicals. They are more lightweight than rubber and have good damping properties. They are heat-resistant up to 120°C and flexible at low temperatures up to -30°C.

TPU: thermoplastic polyurethane
Thermoplastic polyurethane is a special PU. It has the same positive properties and some more advantages such as a better abrasion behaviour, bending endurance and slip resistance.

Outsole design
Outsoles with the Baak® go&relax system allow the feet to bend naturally in the area of the basic toe joints. This is guaranteed by the Baak® flex zone – which is specially integrated in the outsole – in combination with the Baak® flex cap and the H-coupling element.

With the electronic footprint measurement (pedography), the pressure load on the foot during its roll movement (from heel to the outer ball to the big toe) is displayed in different colors. The colors green and blue show a small, red and yellow a big pressure load. The lower the pressure load, the lower the stress on the whole musculoskeletal system of the human being.

Textile anti-penetration
Besides the steel midsole, there is also the alternative of a textile penetration resistance which consists of different layers, made of dense textile material, which is extremely hard for a nail to penetrate. The advantage is the better flexibility, and it is possible to produce metal-free shoes. However, for the robust use on construction sites, we recommend a steel midsole.

In general, it should be considered that in the laboratory, the shoe is tested by use of a bodkin test nail of 4,5mm diameter and a force of 1100 N. Higher force or thinner nails can increase the risk of penetration. In such cases you should take alternative preventive measures.

1100 N is about 110 kg static weight. This load can be reached already by a person of about 80kg by walking or jumping.

Waterproof shoes
Waterproof shoes from Baak are equipped with a membrane from Sympatex.

What is Sympatex?
Sympatex is high-end quality and sophisticated technology in only 5mm thickness. It is the high standard of its products which makes Sympatex one of the world’s leading specialists in high-tech functional systems for clothing, shoes, accessories and medical engineering products. The highly developed Sympatex technology enables the perfect implementation of different laminates (combination of membrane and carrier material) with exactly tailored functions. The Sympatex membrane has a non-porous polytherester structure with unique properties:

  • Perfectly breathable
  • 100 % waterproof
  • 100 % windproof
  • 100 % bio-degradable

 

Here you can find models with Sympatex membrane:
Bruce Art. 6390 (Halfshoe) Big Bruce Art. 6690 (Boot)

BOA® Fit System

The Boa Fit System provides powerful and perfectly tailored fit solutions for a wide range of products in various categories (occupational safety, sports and medical). It consists of a finely adjustable twist lock, a light but extremely strong rope and low-friction rope guides. Each individual configuration not only optimizes the fit of the product, but is safe, fast, adaptable, robust and comes with the Boa warranty.

Performance through fit.
The perfect fit ensures lasting all-day comfort. Even fine adjustments can be made quickly and easily during work.

Trust in every situation.
The Boa Fit System repels ice, dirt and oil and works reliably to stay focused. Adjustments are possible without taking off the gloves.

Safe.
Boa’s precision-engineered ropes are inside the twist lock unit, so they can’t get caught anywhere.

Lasts a lifetime.
The specially developed Boa components are tested under the toughest conditions.

The Boa® Warranty.
Boa twist locks and ropes are guaranteed for the life of the product on which they are integrated.

Return to top of page